Specification: Made from Stainless Steel Thickness .4mm Easy to Finish What's Included: 2x 1/10 Hilux 4WD Emblem Set for Mojave and Hilux Body Replacement Parts: Complete Mojave Body Set for Trail Finder 2 (White) Complete Mojave Body Set For Trail Finder 2 (Primer Gray) Complete Mojave Body Set For Trail Finder 2 (Matte Black) Notes: To finish and detail the Emblem. Just spray paint the entire Emblem with your color choice. We prefer Black After the paint has dried and you have good even coverage, use a fine grit sandpaper and rub the Emblem on the sandpaper. Recommend a 2000 grit, or the Tamiya (V-TAM87060) Lightly sand until you have removed the black from the "Hilux 4WD" like shown above. You can then use some metal polish to further enhance the look and polish the Emblem to a shiny look This product is easy to bend. So be careful.